Kapton HN

Kapton® HN film or tape is a good electrically insulating heat resistant full polyimide film/tape which can optionally be provided with an adhesive layer. Kapton® can be laminated, metallized, stamped, formed.

Kapton® HN is the choice for applications requiring a full polyimide film, with excellent properties over a wide temperature range of -269°C and up to +400°C.

• 3D printer
• Mechanical parts
• Electronic parts
• Electrical insulation
• Pressure sensitive tape
• Fibre optics cable
• Insulation blankets
• Insulation tubing
• Automotive diaphgrams sensors and manifolds
• Etching
• Shims

Available in 5 thicknesses: 0.025 mm, 0.05 mm, 0.075 mm, 0.1 mm, 0.125 mm.

With adhesive layer: width 10 mm – 1000 mm and length 100 mm – 200.000 mm.

Without adhesive layer: width 10 mm – 600 mm and length 100 mm – 200.000 mm.

Dumico can supply Kapton® according to your drawing, within the above dimensions.

• No melting point, test method ASTM E-794/85(1989)
• Temperature – 269°C to + 400°C
• Dielectric strength at 25 μm is 303 V/m kV/mm
• Available in 5 thicknesses: 0.025 mm, 0.05 mm, 0.075 mm, 0.1 mm, 0.125 mm.
• With or without adhesive layer